Hivatkozás megosztása e-mailben

Nem töltött ki minden kötelező mezőt.

e-mail küldése

Kérdései vannak?

Típus 0450 - 3/2‑utas vagy 5/2‑utas hengertolattyús szelep

Mivel kombinálható

Product Image Type 2516

Típus 2516

Kábelcsatlakozó DIN EN 175301-803 –...

Táblázat mutatása Táblázat kicsinyítése

Alkalmazások és eszközök

Letöltések

Adatlap

	Leírás	Fájlméret	Nyelv / ország
	Data sheet Type 0450 \| Mechanically actuated piston slide valve [EExi variant]	339,1 kB	EN / EU
	Datenblatt Typ 0450 \| Mechanisch betätigtes Kolbenschieberventil	133,8 kB	DE / DE
	Datenblatt Typ 0450 \| Pneumatisch betätigtes Schieberventil [Flanschvariante]	104,7 kB	DE / DE
	Datenblatt Typ 0450 \| Pneumatisch betätigtes Schieberventil [Gewindevariante]	174,6 kB	DE / DE

Használati utasítás

	Leírás	Fájlméret	Nyelv / ország
	Additional manual PX01, PX02,PX03 \| Use in the explosion-hazard area	121,5 kB	EN,FR,DE / EU
	Operating Instructions Type 0450 0550 0650 \| 3/2-way, 5/2-way, 5/3-way gate valve	445,4 kB	EN,FR,DE,ES / EU
	Operating Instructions Type 0450 \| Block assembly, aluminium baseplate Type MP05	876 kB	EN,FR,DE / EU
	Operating Instructions Type AC10 \| EPS 18 ATEX 1088 X	920,6 kB	EN / EU
	操作手册 AC10 型 \| 设备具有 II 2G/D Exi 认证	859,6 kB	ZH / CN
	Bedienungsanleitung Typ AC10 \| EPS 18 ATEX 1088 X	915,1 kB	DE / DE
	Gebruiksaanwijzing Type 0450 550 650 \| 5/2- en 5/3- schuifventielen	251,3 kB	NL / NL
	Manuel d'utilisation Type AC10 \| EPS 18 ATEX 1088 X	920,9 kB	FR / FR

Megfelelőségi nyilatkozat

	Leírás	Fájlméret	Nyelv / ország
	EU-DoC\|EU Declaration	37,9 kB	EN,FR,DE
	EU-DoC\|EU Material Compliance	40,2 kB	EN
	EU-DoC\|EU Material Compliance	41,7 kB	FR
	EU-DoC\|EU Material Compliance	40,9 kB	DE

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 4,00 mm | Flange | 0,00 V - 0,00 V | 3,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 360,00 l/min

78,50 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 14,00 mm | Flange | PA (Polyamide) | 0,00 V - 0,00 V | 1,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 3.300,00 l/min | Plug pattern form C according to DIN EN 175301-803

297,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 14,00 mm | Flange | PA (Polyamide) | 0,00 V - 0,00 V | 1,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 3.300,00 l/min

308,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 9,00 mm | Flange | Aluminium | 0,00 V - 0,00 V | 2,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 1.580,00 l/min

182,00 EUR

5/2 - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | 6,00 mm | Flange | PA (Polyamide) | 0,00 V - 0,00 V | 2,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 720,00 l/min

145,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 6,00 mm | Flange | 0,00 V - 0,00 V | 2,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 720,00 l/min

173,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 6,00 mm | Flange | 0,00 V - 0,00 V | 2,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 750,00 l/min

110,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 4,00 mm | Flange | 220,00 V - 220,00 V | 3,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 360,00 l/min | Plug pattern form B according to industrial standard

148,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 9,00 mm | Flange | Aluminium | 24,00 V - 24,00 V | 2,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 1.580,00 l/min | Plug pattern form C according to DIN EN 175301-803

262,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 9,00 mm | Flange | Aluminium | 110,00 V - 110,00 V | 2,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 1.580,00 l/min | Plug pattern form B according to industrial standard

262,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 14,00 mm | Flange | PA (Polyamide) | 24,00 V - 24,00 V | 1,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 3.300,00 l/min | Plug pattern form C according to DIN EN 175301-803

445,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 9,00 mm | Flange | Aluminium | 12,00 V - 12,00 V | 2,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 1.580,00 l/min | Plug pattern form C according to DIN EN 175301-803

201,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 7,00 mm | Flange | 24,00 V - 24,00 V | 2,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 1.200,00 l/min | Plug pattern form A according to DIN EN 175301-803

220,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 7,00 mm | Flange | PA (Polyamide) | 230,00 V - 230,00 V | 2,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 1.200,00 l/min | Plug pattern form C according to DIN EN 175301-803

303,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 6,00 mm | Flange | 24,00 V - 24,00 V | 2,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 750,00 l/min | Plug pattern form B according to industrial standard

167,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 7,00 mm | Flange | PA (Polyamide) | 24,00 V - 24,00 V | 3,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 1.200,00 l/min | Plug pattern form C according to DIN EN 175301-803

226,00 EUR

5/3 - L - middle position all port connections closed - inlet port 1, outlet p ort 4 and 2, vent of outlet ports to 5 respectively 3 | 7,00 mm | Flange | PA (Polyamide) | 24,00 V - 24,00 V | 3,00 bar - 10,00 bar | -10,00 °C - 70,00 °C | 1.200,00 l/min | Plug pattern form A according to DIN EN 175301-803

324,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 9,00 mm | Flange | Aluminium | 24,00 V - 24,00 V | 3,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 1.580,00 l/min | Plug pattern form C according to DIN EN 175301-803

184,00 EUR

5/2 - H/Z - normally open - inlet port 1 connected with outlet port 2, outlet port 4 connected with exhaust port 5, exhaust port 3 closed | 6,00 mm | Flange | 24,00 V - 24,00 V | 2,00 bar - 8,00 bar | -10,00 °C - 70,00 °C | 750,00 l/min | Plug pattern form B according to industrial standard

244,00 EUR